In Electropermanent systems with Permanent Magnet Electromagnets, there is no need for a battery system in the magnet, or when the uninterruptible power supply is powered off while the product is running, its magnetism remains active for a long time without the need for any energy. When you want it to let go, when you energize it again, it neutralizes and demagnetizes and releases the piece it is holding. It provides serious time savings as it prevents loss of work in terms of transport and release times of ferromagnetic (iron) parts. The magnetization and demagnetization cycles take approximately 1-2 seconds. Thanks to these features, the power of the electromagnetic can be controlled; the on-off system and the permanent magnet provide the maximum level of safety for the operator and the machine. They are systems designed to carry sheet metal and coils away from the load under the control of a single operator with remote control, without the need for other human power.

Electropermanent magnetic lifters are state-of-the-art products used in rolling mills, iron-steel industry, steel construction works, distribution and storage, metal industry, metal processing, shipyards, high tonnage sheet plates, block parts transport and lifting.

HANDLING SYSTEMS FOR ELECTROPERMANENT CRANE HEADS

We have different models available. :

EPT-CT Series – Electromapermanent Coil Transport System

EPT-ST/FT Series – Electromapermanent Sheet Transport System with Fixed Traverse

EPT-ST/TT Series – Electromapermanent Sheet Metal Handling System with Telescopic Traverse

EPT-ST Series – Electromapermanent Sheet Transport System

Our Electropermanent Conveying Systems are manufactured in our Izmir Factory in Turkey and are under the guarantee of our company. In addition to carrying the Mıknatıs R&D brand, we also have technical service during and after the warranty. Special production can be made.

PET-CT Series – Electropermanent Coil Transport System

Coils, especially large ones, are a particularly difficult load to safely handle. When trying to move using conventional means (hooks, chains, cables), it tends to deform, making the handling of the load unstable and dangerous. EPT-CT Series – Electromapermanent Coil Transport System are systems designed to carry cold rolled coils away from the load under the control of a single operator with remote control, by taking the load evenly from above without deformation or damage to the load, without the need for other manpower.

Working Principle:

When energized, the magnetics remain magnetic when you cut off the energy. When energized again, it releases the piece. (MAG-DEMAG)

Features:

It does not leave the material in power cuts.

It provides the maximum level of safety for the operator and the machine.

Max. Operating temperature: -20 / +80ºC

The number and dimensions of Electropermanent Plates vary depending on the diameter of the Roll to be transported.

Maximum Material Outer Diameter: 1550 mm for EPT-CT3 Series (3-Way Electropermagnet) – 2050 mm for EPT-CT4 Series (4-Electropermagnet)

Minimum Material Outer Diameter: 850 mm Material Inner Diameter: 508 mm

Maximum Material Width: 500 mm Minimum Material Width: 20 mm

Maximum Material Weight : 8 Tons for EPT-CT3 Series (3-Way Electropermagnet) – 10 Tons for EPT-CT4 Series (4-Way Electropermagnet)

It provides significant time savings as it prevents job loss in terms of transportation and drop-off times.

Our Electropermanent Conveying Systems are manufactured in our Izmir Factory in Turkey and are under the guarantee of our company. In addition to carrying the Mıknatıs R&D brand, we also have technical service during and after the warranty. Special production can be made. You can contact our technical team for your requests.

EPT-ST/FT Series – Electropermanent Sheet Metal Handling System with Fixed Traverse

Plates, especially large ones, are a particularly difficult load to handle. When trying to move using conventional means (hooks, chains, cables), the plates tend to flex and deform, making the handling of the load unstable and dangerous. EPT-ST/FT Series – Electromapermanent Sheet Metal Conveying System with Fixed Traverse is a system designed to transport sheet metal sheets away from the load under the control of a single operator with remote control, by taking the sheet metal plates evenly from above without causing deformation or damaging the load.

Working Principle:

When energized, it becomes magnetized and when you cut off the energy, its magnetism continues. When energized again, it releases the piece. (MAG-DEMAG)

Features:

It does not leave the material in power cuts.

It provides the maximum level of safety for the operator and the machine.

Max. Operating temperature: -20 / +80ºC

Min. sheet plate thickness 5 mm

Length of Sheet Plate: max.6000 mm

Width of Sheet Plate: 1500-3500 mm

Maximum lifting capacity varies depending on the surface smoothness and cleanliness of the sheet metal, the magnetic susceptibility of the steel (carbon ratio), its thickness, and the contact surface of the part.

Depending on the size of the sheet metal to be transported, the number and dimensions of Electropermanent Plates vary.

It provides significant time savings as it prevents job loss in terms of transportation and drop-off times.

Our Electropermanent Conveying Systems are manufactured in our Izmir Factory in Turkey and are under the guarantee of our company. In addition to carrying the Mıknatıs R&D brand, we also have technical service during and after the warranty. Special production can be made. You can contact our technical team for your requests.

EPT-ST/TT Series – Electropermanent Sheet Metal Handling System with Telescopic Traverse

When large sized Sheet Plates are attempted to be moved by conventional means (hooks, chains, cables), the sheets tend to flex and deform, making the handling of the load unstable and dangerous. , EPT-ST/TT Series – Electromapermanent Sheet Metal Handling System with Telescopic Traverse is designed to carry the load equally from above without deformation or damage to the load, and to carry it away from the load under the control of a single operator with remote control, without the need for other manpower.

Working Principle:

When energized, it becomes magnetised, and when you cut off the energy, its magnetism continues. When energized again, it releases the piece. (MAG-DEMAG). The telescopic movement is driven by a special hydraulic pump; the movement of the telescopic arms allows the handling of large sheet metals.

*For shorter plates, only the middle cross Electropermanents can be activated.

*All cross Electropermagnet Plates can be activated when the side modules for the middle plates are in the off position.

*For long plates, all cross Electropermanent Plates are activated and must be used with the arms extended to the maximum opening.

*Activate only the left or right side modules for narrow plates.

Features :

It does not leave the material in power cuts.

It provides the maximum level of safety for the operator and the machine.

The ability to lengthen or shorten the center distance between the Cross Travers and select the modules to be magnetized makes its use extremely flexible.

The telescopic movement allows large sheet metal plates to be transported and it is possible to lift loads of various lengths by simply selecting the required magnetic modules.

Max. Operating temperature: -20 / +80ºC

Min. sheet plate thickness 5 mm

Length of Sheet Plate: min. 6000 mm max.12000 mm

Width of Sheet Plate: 2500-3500 mm

Maximum Carrying Capacity: 8 Tons (tested on a min. 20 mm scanned clean surface.) (Max. Lifting capacity varies depending on the surface smoothness and cleanliness of the sheet metal, magnetic susceptibility of the steel (carbon ratio), thickness, and contact surface of the part.

Depending on the size of the sheet metal to be transported, the number and dimensions of Electropermanent Plates vary.

It provides significant time savings as it prevents job loss in terms of transportation and drop-off times.

Our Electropermanent Conveying Systems are manufactured in our Izmir Factory in Turkey and are under the guarantee of our company. In addition to carrying the Mıknatıs R&D brand, we also have technical service during and after the warranty. Special production can be made. You can contact our technical team for your requests.

EPT-ST Series – Electropermanent Sheet Metal Handling System

We have productions in different shapes used to transport narrower and smaller sheet metals of different sizes. Cylindrical or rectangular Electropermanent plates are designed according to demand.

Working Principle:

When energized, it becomes magnetised, and when you cut off the energy, its magnetism continues. When energized again, it releases the piece. (MAG-DEMAG).

Features :

It does not leave the material in power cuts.

It provides the maximum level of safety for the operator and the machine.

Max. Operating temperature: -20 / +80ºC

Min. sheet metal thickness 5 mm

Max. The lifting capacity varies depending on the surface smoothness and cleanliness of the sheet metal, the magnetic susceptibility of the steel (carbon ratio), its thickness, and the contact surface of the part.

The number and dimensions of Electropermanent Plates vary depending on the size of the part to be transported.

Our Electropermanent Conveying Systems are manufactured in our Izmir Factory in Turkey and are under the guarantee of our company. In addition to carrying the Magnet R&D brand, we also have technical service during and after the warranty. Special production can be made. You can contact our technical team for your requests.